Dec 6, 2017 ... Glass-Body pH Electrode BNC (GPH-BNC) 2015-current 4110_gph-bnc.jpg. Go Direct pH Sensors. Go Direct pH Sensor (GDX-PH) 2017-current 4110_gdx-ph ...
May 18, 2018 ... Go Direct Glass-Body pH Sensor (GDX-GPH) Go ... Electrode BNC (GDX-NO3-BNC) attached. If you ... Go Direct Electrode Amplifier or ISE Amplifier?
Jul 19, 2017 ... Push the BNC connector of the electrode cable onto the connector on the amplifier, then turn the BNC connector about one-half turn clockwise. It ...
Generally, rinsing the electrode with distilled water after using should suffice. If the glass bulb looks dirty, you can rinse the electrode with warm water...
There are two issues here: 1) Solutions that are difficult to measure 2) Solutions that will damage the sensor Solutions that are Difficult to Measure...
If you calibrate a PH-BNC electrode with an Electrode Amplifier (EA-BTA), typical potential readings are -pH 4 buffer solution: 1.56 volts -pH 7 buffer solution:...
If a pH probe is drifting or not holding a calibration immediately after the calibration process is performed with freshly prepared, accurate standards, then there...
We carry pH/ORP Storage Solution with buffer preservative (mold inhibitor) added. Each bottle contains 500 mL of pH/ORP Storage Solution. We sell this as ....